Product Overview
The PD300EMZ5-1 Plug-in Lamp Module is designed to provide Z-Wave control to a connected dimmable lamp. The PD300EMZ5-1 module is plugged into any standard grounded AC wall outlet, and the lamp is then plugged into the module. Once connected, the lamp can be dimmed or turned on or off remotely via the Z-Wave controller. The module contains two power receptacles - one controlled, and one pass-through (powered at all times).
This Plug-in Lamp Module integrates with other Nortek Security & Control Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range).
Auto-Sense
Unique to Nortek Security & Control, the Auto-Sense feature allows for local lamp activation independent of the Z-Wave controller status. With AutoSense, one can simply switch the connected lamp's manual switch off, then on, and AutoSense will instruct the PD300EMZ5-1 to turn the lamp on.
Main Features
- Signal (Frequency): 908.42 MHz
- Maximum Load Incandescent: 300W maximum, 120 VAC
- Range: Up to 100 feet line of sight between the wireless controller and/or the closest Z-Wave device
- Network wide inclusion
- One controlled and one pass-through outlet
- Security beaming
- Power Requirements: 120 VAC, 60 Hz
General Information
Name: Linear PD300EMZ5-1 GoControl Z-Wave Plug-In Lamp Dimmer Module, Nice S.p.A., Linear
Category: Linear, Smart Home, Smart Plugs & Outlets
UPC Code: 093863140754
Country of Origin: China. Country of origin is subject to change.