Lutron RRD-2ANF-SW RadioRA 2 Fan Control

Description Specification Product Reviews

Product Overview

RadioRA 2 Maestro Local Controls

RadioRA ® 2 Maestro ® local controls function much like standard dimmers and switches, but can be controlled as part of a lighting control system. Local lighting controls are useful in locations where single circuits of lighting need to be dimmed or switched. Local fan speed controls are useful in locations where control of a single ceiling paddle fan is needed.

RadioRA ® 2 Maestro ® dimmers incorporate advanced features such as fade on / fade off, delayed long fade to off, and rapid full on. RadioRA ® 2 Maestro ® local controls include a Front Accessible Service Switch (FASS TM ) for safe lamp replacement. RadioRA ® 2 Maestro ® local controls install in single-pole or multi - location applications. Remote dimmers / switches are available for multi - location control.

Use Lutron ® Designer (Claro ® or Satin Colors ® ) wallplates or designer-style wallplates from other manufacturers. Wallplates are sold separately. Lutron ® Claro ® and Satin Colors ® wallplates snap on with no visible means of attachment. RadioRA ® 2 Maestro ® local controls support color change kits.

Main Features

Load is off and nightlight mode is enabled
Dimmers and switches communicate with the system through radio frequency (RF) and must be located within 30' of a repeater
Remote dimmers / switches are not required to be within a specific range of a repeater
System devices operate on frequencies between 431.0 MHz and 437.0 MHz
Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2 ESD protection
On a single tap, fan turns on or off
Provides 4 quiet speeds plus off
Not for use with fans that have integrated fan speed or light control modules
Requires a neutral connection
Controls one paddle type ceiling fan (permanent split capacitor motor) up to 2A, not for use with shaded pole type motors